Click here to download MSDS for this product.
- The best of European and North American formulation technology to help you comply with environmental regulations.
- Formulated with No HAPs solvents.
- Ultra low formaldehyde formulation which meets world E-1 standards for a better work environment.
- High solids, 42% - just 2 coats will build an excellent finish.
- Self-seal, 1 - product finishing system, no sealer necessary.
- Sands better than most sealers.
- No recoat window - quick cure cycle.
- Fast dry - dries much faster than most conventional catalyzed varnish products.
- Can be force dried up to 120°F to accelerate the drying cycle.
- Duravar Plus can be applied over M.L. Campbell Woodsong® stains in 20-30 minutes.
- Exceptional durability and resistance to water, household chemicals and wear by usage.
- Available in four lusters - gloss, semi-gloss, satin and flat.
- Further adjustments of the luster can be achieved by intermixing.
- Packaged with a viscosity ready for spray application.
- Easy mixing - just add catalyst.
- Easily applied with conventional spray, airless spray, air assisted airless spray or HVLP equipment.
DuraVar Plus™ Products/Test and Performance Specifications
Duravar Plus has undergone rigorous quality testing to verify performance and application characteristics. The M.L. Campbell laboratory has formulated Duravar PLUS to meet or exceed the required performance levels established by KCMA for finishes. Durava Duravar Plus has been tested utilizing the following ASTM and KCMA test methods. Hot/Cold Check Resistance
Purpose: Test the ability of the finish to withstand hot and cold cycles for prolonged periods. Cross Hatch
Purpose: Test the ability of the finish to adhere to various substrates and/or finishes. Chemical Resistance
Purpose: Test the ability of the finish to withstand substances typically found in kitchens and bathrooms. Print Test
Purpose: Test the ability of the finish to be print or mar resistant. Heat Resistance (Wet and Dry)
Purpose: Test the ability of the finish to withstand high heat for long periods. Blocking
Purpose: Test the ability of the finish to withstand any finish defects from stacking or packing.
|
