Available in Gloss, Semi-Gloss, Satin, or Dull lusters
MagnaMax ™ Test and Performance Specifications
MagnaMax has undergone rigorous quality testing to verify\r\nperformance and application characteristics. The M.L. Campbell laboratory\r\nhas formulated MagnaMax to meet or exceed the required performance levels\r\nestablished by KCMA for finishes. MagnaMax meets the AWI finishing standard\r\nTR-4. MagnaMax has been tested utilizing the following ASTM and KCMS test\r\nmethods: 1= poor, 5 =excellent.
Hot/Cold Check Resistance
Purpose: Test the ability of the finish to withstand hot and cold cycles for prolonged periods. Passes 20 cycles.
Cross hatch
Purpose: Test the ability of the finish to adhere to various substrates and/or finishes. Rating of (5).
Blocking
Purpose: Test the ability of the finish to withstand any finish defects from stacking or packing after 4 hour drying time. Rating of (5).
Print Test
Purpose: Test the ability of the finish to be print resistant. No print after 24 hour dry time.
Chemical Resistance
Purpose: Test the ability of the finish to withstand substances typically found in kitchens and bathrooms. Meets AWI specification TR- 4 for chemical resistance even though MagnaMax is not a conversion varnish.
Wet Heat Resistance
Purpose: Test the ability of the finish to withstand high wet heat for long periods. Rating of (4).
Edge Soak
Purpose: Test a coating's ability to pass testing in relation to a coated cabinet door's resistance to detergent and water. Passes.
